Blanket Ladder Diy 2x2. This one makes use of reclaimed timber and discarded pallets, while the bar top is made of old roof joists. Put some wood glue inside the notches.
Easy diy blanket ladder tutorial + 6 other ways to use it: So i measured up 16″ from the end of both 2x4s, made a mark for the bottom rung, and then measured every 13″ up from there and made marks for the subsequent rungs. I used a circular saw to cut the wood.before i cut the 2x2 board, i measured the top of my toilet to make sure the rungs would be long enough and make the ladder wide enough to fit around the toilet.i cut 2 pieces of the 2x2 at 22” long.
Lay the two shorter (horizontal) pieces inside the longer (vertical) pieces.
Then from the third, cut four 16 inch long pieces for the rungs. After a while, i started looking into buying one because he never had the time. For our blanket ladders we like to use a high quality, builder grade pine. Tutorial via joy in our home.