Diy Bench Cushion No Plywood. After gathering the materials, it only took me about 15 minutes to make. I used a marker and measured 3 inches all the way down the foam and used a ruler to make a straight line.
Then if your material is pulled as tightly as possible when stapled to the board there will be no wiggle room for the cushion. This diy no sew bench cushion is so easy and inexpensive! My aunt was gracious enough to sew a seam to avoid a sideways pattern, but, if you are like me, and lack the ability to sew, you certainly can complete this project without a sewing.
I made a no sew diy bench cushion with leftover plywood cut to fit the top of my piece, an old mattress pad cut slightly larger than my plywood, batting to wrap and staple around that, and a curtain panel/fabric to wrap and staple.
1 sheet of plywood (thinnest available; Know how to upholster your bench cushion in style with this easy diy video. The idea is to build a bigger wooden box that can easily be finished with hinged lid and bottom wheels and you can make it cushioned to use as a bench! Note that you do need to add the 1 inch seam allowance because we want to overlap the 2 bottom pieces a little bit to create envelope closure